This is a demo store. No orders will be fulfilled.
FESTOOL 583493 Dust Extractor CT 36 HEPA
CT 36 HEPA Dust Extractor - 583493
For complete
details, visit our HEPA Dust Extractor website.
Dust control is an integral part of the Festool system and
design philosophy. That is why the CT 36 is equipped with tool-triggered auto
start functionality so that when you plug your tool into the supplied outlet
socket, the vacuum cycles with the tool. This represents greater efficiency in
dust extraction, noise reduction, and with less energy consumption versus a
constant-on unit. Variable suction force allows you to regulate the suction
based on your tasks. A small detail sander may not require the full 137 CFM of
this unit, but a router may require it.
This unit comes standard our new self-cleaning bag which
prevents dust particles from caking inside the bag which reduces suction. We
further optimize efficiency with the low-profile, flat-top design that allows
the CT top to double as a tool rest as well as an integrated hose garage and
docking station that allows the connection of Festool Systainers (not included)
for easy transport and storage. The low center of gravity, integrated center
handle, and extra large wheels make navigating rough terrain in the shop or
jobsite easy without tipping over. A parking brake can even be locked to prevent
unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS)
hose is long enough for power tool and general work site clean up tasks.
For wet (water) clean up tasks, the CT will shut off
automatically when full thanks to Level Stop technology. With an industrial
design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A
cord wrap is supplied to attach to the rear of the unit. With 137 CFM and only
62 dB (on the low setting), the CT 36 can quickly and quietly remove large
amounts of debris, with minimal noise. A HEPA filter comes standard and offers
the ultimate in clean air and filtration. The CT 36 is a good choice for the
shop or the jobsite for all your power tool extraction and clean-up needs.
Automatic Tool
Start & adjustable suction with tool triggered or manual on-off switch and
infinitely variable suction force, can be used wet or dry.
Supplied with
11-1/2 foot long anti-static hose that is flexible and kink-resistant and will
minimize shock hazards as well as reduce static cling.
Sys-dock and hose
garage feature allows for the storage and transport of Festool Systainers (not
included) on the top of the flat, low-profile unit.
Large wheels, low
center of gravity, and ergonomically balanced design allows you to move the CT
effortlessly around the jobsite.
Features & Benefits.
HEPA Filters
HEPA filters are standard and remove 99.99% of particulate
to 0.3 micron. In fabrication, dust happens. It's very small, floats everywhere,
lands on everything in sight, and gets inside your tools. Due to its minute
size, wood dust particles can be particularly troublesome to remove from an
environment once airborne. The fine dust that is ejected into the air can make
you sneeze, cough, and experience other allergy-like symptoms. Experts agree
that limiting your exposure is the best protection.
Automatic Tool Start
& Adjustable Suction
Smooth start, infinitely adjustable electronic air flow
control and tool triggered or manual on-off switch ensures convenient and
efficient dust control.
Convenient Carry
Handle
An ergonomic handle is positioned 7-9 inches in from the
body, which is the most natural position for lifting. The supplied antistatic
hose stores neatly into the integrated hose garage, a standard feature on all
current dust extractor models. The hose garage also protects your hose from
inadvertent damage during transit. A dust extractor that is designed properly
will offer convenient storage solutions for keeping the hoses and accessories
well organized and readily available. On-board cradles, handles, and the ability
to use the flat top as a temporary shelf to support tools are nice features that
you should consider.
Sys-Dock
Festool's ingenious Sys-Dock feature turns your dust
extractor into a mobile cart for your tools and accessories. Festool Systainers,
the carrying cases which are standard with nearly every Festool power tool,
latch to the top of our dust extractors allowing you to move tools together,
reducing steps when setting up your jobsite. The Sys-Dock is also flat, serving
as a convenient place to rest your tool or materials while you work.
Anti-Static Hose
As with all CT dust extractors, the 1 1/16” x 11.5’ (27mm x
3.5m) antistatic hose comes standard.
Automatic Water
Level Sensor
Having the ability to vacuum wet spills is important. An
integrated water level detector and auto shut-off minimize problems with
overfilling your vacuum with too much liquid. The motor housing is sealed, and
the lid has a gasket to keep water where it belongs. A complete range of
optional Festool cleaning sets complement both wet and dry operations.
Cord Storage
Everything needs its own storage space. The cord can be
wound on the dedicated cord wrap to prevent it from getting in the way during
transportation.
Large Wheels
Festool dust extractors are designed with a low center of
gravity to prevent inadvertent tipping. Many other manufacturers' units are not
designed in this way and tipping could result in costly damage to the vacuum or
to your client's floors. An easy-to-use, conveniently located parking brake
offers peace of mind to prevent your Festool dust extractor from rolling down
stairs or moving during transport in your vehicle. Festool CT dust extractors
feature larger-than-average wheels, making it easy to maneuver over bumpy
terrain with ease. The wheels are coated in a rubber-like, non-marring material
to protect your clients' floors from damage and abrasion.
Specifications
27mm Antistatic Hose |
|
Cord Wrap |
|
Hose Garage |
|
Self-Cleaning Filter Bag |
|
Container Capacity |
9.5 gal |
Dimensions (in.) |
24.8" x 14.4" x 23.4" |
Filter Bag Capacity |
8.9 gal |
Filter Type |
HEPA |
Max. Suction Force |
137 CFM |
Noise Level |
62 - 72 db(A) |
Power Consumption |
350-1200 watts, 2.9-10.0 amps |
Static Water Lift |
96" |
Weight |
29.8 lbs. |
Availability | Out of Stock |
---|---|
Manufacturer | FESTOOL |
Manufacturer Sku | 583493 |